Information, Technology & Consulting

Knowledge Base Search

Use the search box to query for articles in the Knowledge Base, or use the categories on the left to narrow down what results you are interested in.

The search found 5 results in 0.043 seconds.

Search results

    Konica Minolta Mac Setup

    Step-by-Step

    Before you begin, you will need to know your computer’s operating system. To find this information, click the Apple menu, then About this Mac

    Setting up a new printer is a three-step process: download the driver, install it, then configure the printer.

    Download the Driver

    Go to http://onyxweb.mykonicaminolta.com/OneStopProductSupport/

    Konica Minolta Windows Setup

    Step-by-Step

    Set Separate Scan ON as Default on a Konica Minolta

    Step-by-Step

    1. Press the Scan/Fax button.
    2. Select Application.
    3. Select Separate Scan to turn it ON.
    4. Press the Menu button.
    5. Select Utility.
    6. Press User Settings, then Scan/Fax Settings, then Default Scan/Fax Settings.
    7. If Current Setting is selected, change selection to Default Setting, then press OK.

    Konica Minolta Copiers - Reports using Account Track

    Step-by-Step

    Departments who need to track and bill copier usage on Konica Minolta devices need to have Account Track enabled, and the PageScope Data Administrator application installed on a Windows computer. Once that is done, follow the steps below to report on the usage.

    Scanning Separate Originals on a Konica Minolta

    Step-by-Step

    1. Press the Fax/Scan button on the Konica Minolta device.
    2. Select the destination email address.
    3. Place first original on the glass or in the Automatic Document Feeder (ADF).
    4. On the screen, in the lower right corner, press Application.
    5. In the Application window in section B, make sure that Separate Scan is set to ON.
    6. Press the Close button.
Close
Information, Technology & Consulting