Information, Technology & Consulting

CrashPlan Backup Paused - Blocked Network

Details

The CrashPlan application displays a Network Blocked message when configured to block a specific network connection. By default, all network connection options will be set to "ON", not blocked.

To check the CrashPlan network settings:

For wired networks:

  1. Open the CrashPlan application.
  2. Click Settings then the Network tab.
  3. Next to Network interfaces, click Configure.
  4. Check all of the networks you want the CrashPlan application to use.
  5. Click OK to save your changes.

For wireless networks:

  1. Open the CrashPlan application.
  2. Click Settings then the Network tab.
  3. Next to Wireless interfaces, click Configure.
  4. Check all of the networks you want the CrashPlan application to use.
  5. Click OK to save your changes.

For more information, refer to the following Code42 support article found at http://support.code42.com/CrashPlan/Latest/Troubleshooting/Connection_Shows_Network_Blocked

 

Topic: 
Computer and Device Services
Subtopic: 
Desktops and Laptops
Last updated: 
Monday, June 13, 2016

If you have questions or need further information, contact your department's IT support office, or contact the IT Service Desk via email at [email protected], via phone at 603-646-2999 or walk in to see them in Baker/Berry 178J.

Close
Information, Technology & Consulting