Information, Technology & Consulting

Network Printer Web Interface No Longer Accessible

Step-by-Step

If the printer is functioning fine otherwise, but you cannot access the web interface for the printer or copier, follow the steps below:

  1. Completely power down the copier.
  2. Unplug the power cord from the wall as well as the Ethernet cable.
  3. Wait for a minute.
  4. Plug everything back in and start up the copier or printer again.
Topic: 
Computer and Device Services
Subtopic: 
Faculty and Staff Printing
Last updated: 
Friday, November 17, 2017

If you have questions or need further information, contact your department's IT support office, or contact the IT Service Desk via email at [email protected], via phone at 603-646-2999 or walk in to see them in Baker/Berry 178J.

Close
Information, Technology & Consulting